Removing The Smartcard Reader / Palm Sensor - Fujitsu ESPRIMO Q55 Series Operating Manual

► Insert the reader/sensor lead into the drive cage (5) as illustrated.
► Reinstall the drive cage (see
care that no cables get jammed.
► If you do not want to remove or install any other components, replace the top casing
cover (refer to "Securing the top casing cover", Page

Removing the SmartCard reader / palm sensor

• The top casing cover has been removed (refer to
Removing the reader/sensor
► Remove the drive cage (see
► Remove the reader/sensor lead from the motherboard (see graphic on slots in Section
"Overview of the installation openings and drives in your device", Page
► Reinstall the drive cage (see
care that no cables get jammed.
Fujitsu
5
"Installing the drive cage", Page
"Removing the casing top cover", Page
"Removing the drive cage", Page
"Installing the drive cage", Page
System expansions
5
69). Take
67).
68).
62).
69). Take
66).
87