Getting started
Fitting the device to the VESA interface on a monitor (optional)
With ESPRIMO Q956/957 type devices, the casing cover is already fitted
with the corresponding screw holes by default.
With ESPRIMO Q55x/Q958 type devices, you can order the corresponding
casing cover with screw holes separately if necessary.
The device must be fitted onto the screen in such a way that the connecting
and operating elements can be used from the side.
Remove the bottom cover
•
Requirement: The casing is opened and the casing cover is removed (refer to
"Remove the casing bottom cover", Page
► Release the locking lug (1) on the underside cover from the casing cover
and remove the underside cover (2).
Information about fixing the underside cover is provided in Section
underside cover (device-dependent)", Page
26
97).
1
1
2
18.
"Fitting the
Fujitsu