Connecting External Devices To The Usb Ports; Connecting A Ps/2 Device - Fujitsu ESPRIMO Q55 Series Operating Manual

Connecting external devices to the USB ports

Devices Externaldevices USBport USBdevices
You can connect a wide range of external devices to the USB ports (e.g.
printer, scanner, modem or keyboard).
USB devices and hot plug-enabled. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
► Connect the data cable to the external device.
► Connect the data cable to one of the USB ports on your device.
Device drivers
External USB devices which you connect to one of the USB ports don't usually
need their own drivers because the software required is already included in
the Operating System. If the device requires separate software, please follow
the instructions in the manufacturer's documentation.

Connecting a PS/2 device

Only use the supplied lead.
A PS/2 device is only recognised by the PC if you connect the PS/2 device
when the PC is switched off and then switched on again.
connecting ConnectingaPS/2device
► Connect the PS/2 device to the PS/2 port on the PC.
► Switch the PC back on.
Fujitsu
Getting started
37