Removing And Attaching The Bottom Casing Cover; Remove The Casing Bottom Cover - Fujitsu ESPRIMO Q55 Series Operating Manual

Removing and attaching the bottom casing cover

You need to remove the top casing cover if you want to remove or install the following components:
• Memory modules

Remove the casing bottom cover

► Turn the device over.
► If you are using a lathing clip and a padlock to protect the device, remove the lock
and open the latching clip (see
or
► If you are using a latching clip and a Kensington Lock cable to protect the device,
remove the Kensington Lock cable and open the latching clip (see
security lock", Page 52
► Push the release button on the rear side of the device in the direction of the arrow (1) while
at the same time sliding the bottom casing cover in the direction of the arrow (2).
► Lift the bottom casing cover off the device (3).
Fujitsu
"Using a locking slide", Page
and "Using a locking slide", Page
3
2
System expansions
53).
"Using the
53).
1
97