Connecting The Monitor; Connecting A Usb Mouse; Connecting A Usb Keyboard; Connecting External Devices To The Serial Interface - Fujitsu ESPRIMO Q55 Series Operating Manual

Getting started

Connecting the monitor

Connect the monitor to your device only if it is switched off.
► Follow the instructions contained in the monitor operating manual to prepare
the monitor (e.g. connecting cables).
Monitor
► Plug the data cable into the desired monitor port of the device.
► Plug the monitor power cable into the grounded mains outlet.

Connecting a USB mouse

► Connect the USB mouse to one of the USB ports on the device.
USBport Connectinga USBmouse

Connecting a USB keyboard

Use the keyboard cable provided with the keyboard (not included in the delivery scope of the device).
USBport connecting
► Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Plug the flat rectangular USB connector of the keyboard cable into a USB port of the device.
USBport

Connecting external devices to the serial interface

Externaldevices, Serialinterface, Serialinterface Devices,
For an exact description of how to connect external devices to the corresponding
port, please see the external device documentation.
External devices (e.g. a printer or scanner ) can be connected to the serial port.
► Connect the data cable to the external device.
► Connect the data cable to the corresponding serial interface.
Port settings
Serialinterface,
You can change the settings of the port in the BIOS Setup.
Device drivers
Device drivers,
The devices connected to the serial interface require drivers. Your operating system
already includes many drivers. If the required drive is missing, install it. The latest
drivers are usually available on the Internet or will be supplied on a data carrier.
36 Fujitsu