Indicators on the device
The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
Example: Device variant with SmartCard reader and/or palm sensor
No. indicator
1
SmartCard reader
indicator (device
dependent)
2
Hard disk indicator
3
Power indicator
In the energy saving mode, the device must not be disconnected from
the mains, as this can result in data loss.
Fujitsu
1
2
3
Description
The indicator lights up when the device's SmartCard reader is
accessed (device dependent).
The indicator lights up when the hard disk drive in the device
is being accessed.
Attention: In the energy saving mode, the device must not be
disconnected from the mains, as this can result in data loss.
•
Indicator is illuminated:
The device is switched on.
•
Indicator flashes:
The device is in energy-saving mode. After being switched on
with the On/Off switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
•
The indicator is not illuminated:
The device is switched off (disconnected from the mains) or
is ready. If the device is ready it can be switched on with the
On/Off switch.
Operation
41