Fujitsu ESPRIMO Q55 Series Operating Manual page 82

System expansions
If you have already installed a SmartCard reader/palm sensor
► Remove the SmartCard reader/palm sensor and associated lead (see
"Removing the reader/sensor", Page
Installing a hard disk
► Remove the drive cage (see
► Attach the drive leads to the motherboard (see graphic on slots in Section
of the installation openings and drives in your device", Page
► Install the drive leads onto the drive cage (1) as illustrated.
► Insert the plug for the drive leads (a) through the opening in the drive cage (2).
► Reinstall the drive cage (see
care that no cables get jammed.
► Place the hard disk (6) in the installation frame (3).
78
87).
"Removing the drive cage", Page
1
"Installing the drive cage", Page
3
4
68).
"Overview
62).
1
2
a
69). Take
Fujitsu