Settings In Bios Setup Utility; Starting The Bios Setup Utility - Fujitsu ESPRIMO Q55 Series Operating Manual

Settings in BIOS Setup Utility

Configuringthehardware Configuringthesystem Setup Configuration,BIOSSetupUtility System settings,BIOSSetupUtility BIOS SetupUtility
With the help of the BIOS Setup Utility you can adjust the system functions
and the hardware configuration for your device.
When it is supplied, the device is set to factory default settings. You can change these
settings in BIOS Setup Utility. Any changes you make in the settings take effect as
soon as you save and shut down the BIOS Setup Utility.
The BIOS Setup Utility program contains the following menus:
Menu
Main
Advanced
Boot
Power
Security
Exit
The following function keys can also be used:
Key
Esc
F7
F9
F10

Starting the BIOS Setup Utility

► Start the device (switch off/on or reboot the Operating System).
BIOSSetupUtility
Depending on the setting for Fast Boot in the BIOS Setup Utility the following display,
if applicable, appears on the screen on start-up:
<F2> BIOS Setup <F12> Boot Menu
► Press the function key
► If a password has been assigned, enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator
or contact our customer service centre.
The BIOS Setup Utility starts.
Fujitsu
Description
System settings such as time and date
Advanced system settings
Configuration of the start-up sequence
Power management functions
Password settings and security functions
Exits the BIOS Setup Utility
Description
to shut down the BIOS Setup Utility
The current settings are not saved.
To discard changes and to load the previous configuration of the BIOS
Setup Utility.
To load the default configuration of the BIOS Setup Utility.
to shut down the BIOS Setup Utility
The current settings are saved.
.
F2
Operation
47