Table of Contents
Advertisement
i.
Use an RJ-45 cable to connect the camera to a PoE Injector.
ii.
Use an RJ-45 cable to connect the PoE Injector to the non-PoE
switch.
iii.
Use a standard power cable to connect the PoE Injector to a
power outlet.
C. If using the DC12V power Supply. The RJ45 cable will be for data
transmission.
Step 3. Complete the Installation
Place the dome cover back on the camera device using the Allen Key.
Advertisement
Table of Contents
Need help?
Do you have a question about the VD-E200Af and is the answer not in the manual?
Questions and answers