Lucent Technologies INDeX 20AT User Manual page 28

Wall & Desk Brackets
Clip-on plastic 'shoes' are available for you to either wall mount
or raise the viewing angle of your phone. Only one pair of
brackets ('shoes') are required per phone. To change the
viewing angle, simply click-on a pair of 'shoes' over the top two
legs of the phone.
To wall mount a phone, click-on a pair of 'shoes' over the
bottom two legs of the phone. Fix two screws to the wall (use
diagram opposite for dimensions). Clip the phone, using the
slots in the top two legs, onto these screws. Screws and wall-
fixings are not included as they vary with the wall type.
Performance figures and data quoted in this document are
typical, and must be specifically confirmed in writing by Lucent
Technologies before they become applicable to any particular
order or contract. The company reserves the right to make
alterations or amendments to the detailed specifications at its
discretion. The publication of information in this document does
not imply freedom from patent or other protective rights of
Lucent Technologies, or others.
All trademarks acknowledged. INDeX is a registered trademark
of Lucent Technologies.
©Lucent Technologies 2000.
Sterling Court
15 - 21 Mundells
Welwyn Garden City
Hertfordshire AL7 1LZ
England
Tel: +44 (0) 1707 392200
Fax: +44 (0) 1707 376933
Email: contact@sdxplc.com
Web: http://www.sdxplc.com
38DHB0002UKDU - Issue 1 February 2000