Index Features - Lucent Technologies INDeX 20AT User Manual

Page 8 - INDeX Features

INDeX Features

Introduction
Dialling Timeout
INDeX 20AT Telephone User's Guide
When used on an INDeX telephone system, the 20AT has
access to a wide range of system features. This section of
the guide covers those features. The 20AT telephone
should only be used in the phone sockets indicated by
your System Manager. It will not work in the sockets used
by INDeX 20DS, 20CC, 2010 and 2030/50/60 phones (and
vice versa).
– Network Features
Your phone system may be part of a network linking
several sites. Wherever possible, it treats network calls
as internal calls and offers the same features. However,
this depends on the type of network link and also the
type of system at the other end of the link (ie. some
links may be to non-INDeX telephone systems).
After you start dialling, if you do not dial another digit for
several seconds the system assumes that you have
finished dialling. The system then ignores any further digits
that you dial. By default the timeout is 5 seconds, although
this varies between sites.
Since it is your phone that generates the audible dialling
tones, the system's dialling timeout does not affect calls
connected through the system to services that need to
hear additional MF tones (eg. Voice mail systems, BT star
services, etc).
38DHB0002UKDU - Issue 1 February 2000