Screen; Fixture Settings - ProLights ECLFR2KTU-DY User Manual

10
DMX Address: 33
DMX512 Controller

3.7 SCREEN

It is possible to modify the following parameters, related to the display, following the same procedure:
• Press the knob to access the main menu.
• Rotate the knob to scroll through the menu, select Set Up, then press the knob access the next menu.
• Press the knob to select Screen and press the knob to proceed.
• Select the proposed option with the knob and press the knob to confirm.
- Backlight - Auto Off display backlight. This function allows you to switch off automatically the back-
lighting of the display after a certain time which can be set using the directional keys. To have the
display always on select On or set a value between those shown (10s, 20s, 30s) to turn off the display
once the chosen time has elapsed, after exiting the menu.
- Flip Display - Display orientation. This feature allows you to rotate the display by 180 ° to get a better
view of the display when the unit is hanging upside down. Select Yes to activate the function, No to
deactivate it.
• Press the knob to confirm the selection.
• Press the knob repeatedly to exit the menu and to save the changes made.
3.8 ADVANCED
You can change the parameters for the device by following these steps:
• Press the knob to enter the menu mode.
• Use the knob to select the Advanced. Press the button knob.
• Press the knob to select the desired option and press the Knob to confirm:
- Dimmer Mode - Adjusting the dimmer. Enter in Dimmer Mode to select specific dimming curve.
Particularly when set:
• Off: The increase in light intensity is linear.
• Dimmer 1: dimmer curve with low fade.
• Dimmer 2: dimmer curve with medium fade.
• Dimmer 3: dimmer curve with high fade.
- LED Frequency - To adjust the frequency of the LEDs. Select the frequency 600 Hz - 25 KHz using the knob
and press it to confirm the selection.
ECLFR2KTU-DY
DMX Address: 36 DMX Address: 39
Fig.5 - Example 3 DMX channels configuration
DMX Address: 42
. . . . . . . . . . . .
. . . . . . . . . . . .