Dmx Linking; Wireless Settings; Screen - ProLights ECLIPSEJZIP User Manual

10
3.6 LINKING
1. Connect the DMX OUT of the master unit via 5-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.

3.7 WIRELESS SETTINGS

• To enter the Wireless mode press on MODE and select Connect, then select Wireless Settung using ENTER.
• Select the Receive On/Off function pressing on UP/DOWN, then press on ENTER.
• To activate the Receive function, pressing on UP/DOWN and select the On option.
• Press on ENTER to confirm the selection.
• Press on MODE to go back or wait a few seconds to exit the setup menu.
NOTE - Once you have performed these steps, you must synchronize with any WiFi unit with which you
want to communicate by pressing the sync button on it. At this point connect the DMX console to the
WiFi unit to open the communication with the ECLIPSEJZIP.
• To reset the unit, select the Receive Reset function pressing on UP/DOWN, select Connect, then select
Receive Reset and press on ENTER.
• To activate the mode use UP / DOWN and select the Yes option.
• Press the ENTER button to confirm the selection.
• Press on MODE button to go back or wait a few seconds to exit the setup menu.
• To activate the Wireless to DMX function, use UP / DOWN to press on ENTER until the display shows Con-
nect, then select Wireless to DMX, then press on ENTER.
• To activate the mode use the UP/DOWN buttons and select the Yes option.
• Press on ENTER to confirm the selection.
• Press on MODE to go back or wait a few seconds to exit the setup menu.

3.8 SCREEN

It is possible to modify the following parameters, related to the display, following the same procedure:
• Press on MODE to access the main menu.
• Press on UP/DOWN to scroll through the menu, select Set Up, then press on ENTER to access the next
menu.
• Press on UP/DOWN to select Screen and press on ENTER to proceed.
• Select the proposed option with the UP/DOWN button and press the ENTER button to confirm.
- Backlight - Auto Off display backlight. This function allows you to switch off automatically the back-
lighting of the display after a certain time which can be set using the UP/DOWN. To have the display
always on select On or set a value between those shown (10s, 20s, 30s) to turn off the display once the
chosen time has elapsed, after exiting the menu.
- Flip Display - Display orientation. This feature allows you to rotate the display by 180 ° to get a better
view of the display when the unit is hanging upside down. Select Yes to activate the function or No
to deactivate.
- Key lock - With this function, you can lock the keys on the control panel to prevent, for example, tam-
pering with the settings. If this function is activated, the keys are locked automatically. To disable or
temporarily disable or disable the key lock function, press the keys in the following order to regain
access to the menu commands: UP, DOWN, UP, DOWN, ENTER. Select Yes to activate the function or
No to deactivate it.
• Press on ENTER to confirm the selection.
• Press on MODE repeatedly to exit the menu and to save the changes made.
ECLIPSEJZIP