Requirements For Installation; Required Information; Required Equipment - Intuicom RTK Bridge-X Installation Manual

Overview
The Ag Leader GeoSteer is typically configured to accept CMR or RTCM format RTK
corrections from an Intuicom RTK Bridge
GPS/GNSS reference network. The intended audience for this document is a dealer or integrator
familiar with the Ag Leader GeoSteer and generally familiar with the Intuicom RTK Bridge-X.
The Intuicom RTK Bridge-X User Guide covers the steps necessary for its configuration.

1 Requirements for Installation

1.1

Required Information

In order to operate an Intuicom RTK Bridge–X, you are required to have the necessary
information to access and log in to the Real-Time Network. This information is entered
into the RTK Bridge–X and stored in a profile. More details on setting up an RTK
Bridge–X is available in the RTK Bridge-X manual.
IP address,
•
TCP port,
•
NTRIP mountpoint name,
•
username and password for access to the real-time GPS/GNSS network
•
1.2

Required Equipment

1.2.1 Intuicom Equipment and Accessories
1. Intuicom RTK Bridge–X with activated data provider account (Verizon, AT&T, etc...)
2. Intuicom RTK Bridge–X to Ag Leader GeoSteer data/power cable:
[P/N: XRTKCAB-AGGEO]
3. Intuicom RTK Bridge–X Cellular/GPS antenna/cable:
[P/N: FIP4-MMDM-MM (magnetic mount)]
1.2.2 Other Equipment and Accessories
1. Ag Leader GeoSteer with RTK Unlocked
2. Ag Leader GeoSteer Main Harness [P/N: 201-0530-03]
Version 1.0
Section 1: Installation Requirements
®
-X, which in turn has been configured to connect to a
2 Intuicom, Inc.