Section 1: Installation Requirements; Requirements For Installation; Required Information; Required Equipment - Intuicom RTK Bridge-X Installation Manual

Overview
The Ag Leader GPS 2500 smart antenna is typically configured to accept CMR or RTCM format
RTK corrections from an Intuicom RTK Bridge®-X which in turn has been configured to
connect to a GPS/GNSS reference network. The intended audience for this document is a dealer
or integrator familiar with the GPS 2500 as well as general familiarity with the Intuicom RTK
Bridge–X. The Intuicom RTK Bridge–X User Guide covers the steps necessary for its
configuration.

1 Requirements for Installation

1.1

Required Information

In order to operate an Intuicom RTK Bridge–X, you are required to have the necessary
information to access and log in to the Real-Time Network. This information is entered
into the RTK Bridge–X and stored in a profile. More details on setting up an RTK
Bridge–X is available in the RTK Bridge-X manual.
IP address,
•
TCP port,
•
NTRIP mountpoint name,
•
username and password for access to the real-time GPS/GNSS network
•
1.2

Required Equipment

1.2.1 Intuicom Equipment and Accessories
1. Intuicom RTK Bridge–X with activated data provider account (Verizon, AT&T, etc...)
2. Intuicom RTK Bridge–X Serial DB-9 data/power cable:
[P/N: XRTKPWDT-EZ]
3. Serial Null-Modem Adapter (Male-Male)
4. Intuicom RTK Bridge–X Cellular/GPS antenna/cable:
[P/N: FIP4-MMDM-MM (magnetic mount)]
1.2.2 Other Equipment and Accessories
1. Ag Leader Integra™ or Versa™ monitor for configuration
2. Ag Leader GPS 2500 with RTK unlock
3. GPS 2500 display cable with Port B available
Version 1.0

Section 1: Installation Requirements

2 Intuicom, Inc.