Accu-Scope EXC-350 Series Manual page 19

LED FLUORESCENCE ATTACHMENT
DETAILED ASSEMBLY & OPERATION -
®
ACCU-SCOPE
① ②
Fig. 25
Fig. 26
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
EXC-350 MICROSCOPE SERIES
(Optional)
(Continued)
When observing with fluorescence light, the user
should pull the filter slider
path to block transmitted light from the light path.
When observing with transmitted light, the user should
①
pull the filter slider to the right into the light path to
allow transmitted light into the light path. (Fig. 25)
LED fluorescence filter block adjustment knob
be rotated 180° according to the arrow on the knob to
switch between transmitted brightfield observation and
LED fluorescence observation. (Fig. 25)
Illumination
TO TURN ON: Rotate the fluorescence light
②
adjustment knob clockwise to turn on the LED
fluorescence illuminator.
TO INCREASE ILLUMINATION: Rotate the
fluorescence light adjustment knob clockwise to
increase illumination.
TO DECREASE ILLUMINATION: Rotate the
fluorescence light adjustment knob
clockwise to decrease (darken) illumination.
TO TURN OFF: Rotate the fluorescence light
②
adjustment knob counter clockwise to turn off
illuminator.
When you switch the LED fluorescence filter block
adjustment knob to FLUORESCENCE, the indicator
light on the front of the illuminator unit is ON
(illuminator) and fluorescence observation is possible.
When the LED fluorescence filter block adjustment
knob is turned to BRIGHTFIELD, the indicator light on
the front of the illuminator unit is OFF and brightfield
observation is possible.
NOTE
①
to the left into the light
①
②
counter
NOTE
18
can