Removing The Rear Wheel - KTM 65 SX 2020 Owner's Manual

13.3

Removing the rear wheel

–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
of the spacers.
Long-life grease (
–
Insert the spacers.
H00935-10
–
Clean and grease wheel spindle
Long-life grease (
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert the wheel spindle.
–
Tighten screws
Guideline
V00247-10 Screw, fork stub
–
Mount and tighten screw
Guideline
Screw, front
wheel spindle
–
Remove the motorcycle from the lift stand. (
V00219-11
–
Operate the hand brake lever several times until the brake lin-
ings are seated correctly against the brake disc.
–
Loosen screws
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
Tighten screws
Guideline
V00248-10
Screw, fork stub
Preparatory work
–
Raise the motorcycle with a lift stand. (
1
and contact surfaces
p. 110)
2
.
p. 110)
3
.
M6 10 Nm (7.4 lbf ft)
4
.
M10 40 Nm (29.5 lbf ft)
3
.
3
.
M6 10 Nm (7.4 lbf ft)
p. 39)
WHEELS, TIRES 13
A
Loctite ® 243™
p. 39)
79