11.19
Installing the shock absorber
11.20
Removing the seat
11.21
Mounting the seat
Main work
–
Push splash protector
absorber. Mount and tighten screw
Guideline
Screw, top
shock absorber
–
Mount and tighten screw
Guideline
F02174-11
Screw, bottom
shock absorber
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Open quick release
–
Pull back the seat and remove it.
H00122-10
–
Hook seat onto screw
push it forward.
Holding lug
V00208-10
–
Close quick release
H00122-11
SERVICE WORK ON THE CHASSIS 11
1
to the side and position the shock
2
.
M10
45 Nm (33.2 lbf ft)
3
.
M10
45 Nm (33.2 lbf ft)
1
and raise the rear of the seat.
1
and lower the seat at the rear and
2
hooks into the fuel tank.
3
.
Loctite
®
243™
Loctite
®
243™
p. 39)
49