11 SERVICE WORK ON THE CHASSIS
11.8
42
V00202-10
Installing the fork legs
F02179-10
V00202-11
V00227-11
–
3
Loosen screws
. Remove the left fork leg.
–
4
Loosen screws
. Remove the right fork leg.
Main work
–
Position the fork legs.
1
Bleeder screws
are positioned toward the rear.
Info
The second milled groove (from the top) must be flush
with the upper edge of the upper triple clamp.
–
2
Tighten screws
.
Guideline
Screw, top triple
clamp
–
3
Tighten screws
.
Guideline
Screw, bottom triple
clamp
–
Position the brake caliper, and mount and tighten screws
Guideline
Screw, front
M8
brake caliper
–
Position the brake line and the clamp. Mount and tighten
5
screws
.
Guideline
Screw, brake line
bracket
Finishing work
–
Install the front wheel.
M8
20 Nm (14.8 lbf ft)
M8
15 Nm (11.1 lbf ft)
20 Nm (14.8 lbf ft)
Loctite
EJOT
1.7 Nm
(1.25 lbf ft)
(
p. 78)
4
.
®
243™