11.11
Checking the steering head bearing play
Warning
Danger of accidents Incorrect steering head bearing play impairs the handling characteristic and dam-
ages components.
–
Correct incorrect steering head bearing play immediately. (Your authorized KTM workshop will be glad
to help.)
Info
If the vehicle is operated for a lengthy period with play in the steering head bearing, the bearings and the
bearing seats in the frame can become damaged over time.
–
Tighten screws
Guideline
Screw, top triple
clamp
F02181-11
–
Position the brake caliper, and mount and tighten screws
Guideline
Screw, front
brake caliper
–
Position the brake line and the clamp. Mount and tighten
bl
screws
.
V00227-12
Finishing work
–
Check that the wiring harness, throttle cable, and brake and
clutch lines can move freely and are routed correctly.
–
Install front fender. (
–
Install the start number plate. (
–
Install the front wheel.
–
Check the steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
SERVICE WORK ON THE CHASSIS 11
9
.
M8
20 Nm (14.8 lbf ft)
M8
20 Nm (14.8 lbf ft)
p. 48)
p. 47)
(
p. 78)
p. 45)
bk
.
Loctite
243™
®
p. 39)
p. 39)
45