Removing The Lower Triple Clamp; Installing The Lower Triple Clamp - KTM 65 SX 2020 Owner's Manual

11.9

Removing the lower triple clamp

11.10

Installing the lower triple clamp

Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove front fender. (
Main work
–
Remove fuel tank breather
–
2
Remove nut
–
Remove screw
handlebar and set it aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
V00228-10
–
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
V00229-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing
–
Check whether upper steering head seal
tioned.
–
Push on protective ring
602666-11
SERVICE WORK ON THE CHASSIS 11
( p. 78)
( p. 41)
p. 47)
p. 48)
1
.
.
3
, take off the upper triple clamp with the
4
.
p. 110)
1
.
2
3
.
p. 39)
is correctly posi-
43