KTM 65 SX 2020 Owner's Manual page 98

17 CLEANING, CARE
96
Info
The heat produced causes water at inaccessible loca-
tions in the engine and on the brake system to evapo-
rate.
–
Push back the protection caps on the handlebar controls to
allow water to evaporate.
–
After the motorcycle has cooled off, lubricate all moving parts
and pivot points.
–
Clean the chain. ( p. 55)
–
Treat bare metal (except for brake discs and the exhaust sys-
tem) with a corrosion inhibitor.
Preserving materials for paints, metal and rubber
( p. 111)
–
Treat all plastic parts and powder-coated parts with a mild
cleaning and care product.
Special cleaner for glossy and matte paint finishes, metal
and plastic surfaces ( p. 111)