10.14
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
10.15
Handlebar position
10.16
Adjusting the handlebar position
Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged or bent.
–
Turn adjuster
Info
Adjuster
fork leg.
–
Turn counterclockwise by the number of clicks corresponding
to the fork type.
Guideline
F02178-10
Rebound damping
Comfort
Standard
Sport
Info
Turn clockwise to increase the damping; turn counter-
clockwise to reduce the damping.
On the upper triple clamp, there are 2 holes at a distance of
each other.
A
Hole distance
The holes on the handlebar support are placed at a distance of
from the center.
B
Hole distance
The handlebar holder can be mounted in four different positions.
601951-10
This allows the handlebar to be mounted in the most comfortable
position for the rider.
TUNING THE CHASSIS 10
1
clockwise all the way.
1
is located at the upper end of the right
15 clicks
12 clicks
10 clicks
15 mm (0.59 in)
3.5 mm (0.138 in)
A
to
B
37