Adjusting The Distance Between Carrier Roller And Needle - DURKOPP ADLER 827 Service Instructions Manual

15.2 Adjusting the distance between carrier roller and needle

Proper setting
The distance between the middle of the carrier roller and the middle of
the needle is 28.5 mm.
Fig. 49: Adjusting the distance between carrier roller and needle
①
②
(1) - Screw
To adjust the distance between the carrier roller and needle:
1. Loosen the screw (1).
2. Turn the rocker on the axle (2).
 The distance between the middle of the carrier roller and the middle
3. Tighten the screw (1).
Order
Proceed by adjusting the carrier roller stroke ( p. 69).
68
of the needle is 28.5 mm.
28.5 mm
(2) - Rocker
Service Instructions 827/827-M - 01.0 - 05/2019
Puller