Winder; Adjusting The Winder - DURKOPP ADLER 827 Service Instructions Manual

Winder

13 Winder

13.1 Adjusting the winder

Adjusting the winder filling quantity
Fig. 38: Adjusting the winder filling quantity
(1) - Screws
(2) - Screw
Proper setting
The winder wheel runs smoothly and without axial play.
The winding process will stop automatically when the required filling
quantity of the bobbin is reached.
To adjust the winder filling quantity:
1. Disassemble the arm cover ( p. 15).
2. Loosen the screws (1).
3. Remove the winder.
Service Instructions 827/827-M - 01.0 - 05/2019
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before adjusting the winder.
①
②
③
(3) - Winder lever
(4) - Shank
④
55