Safety Release Clutch; Attaching The Safety Release Clutch - DURKOPP ADLER 827 Service Instructions Manual

17 Safety release clutch

The safety release clutch disengages in the event of the thread jamming
and thus prevents the hook from being misadjusted or damaged.

17.1 Attaching the safety release clutch

Fig. 57: Attaching the safety release clutch
(1) - Threaded pins
(2) - Left-hand set collar
Proper setting
The 4 threaded pins (1) on the two set collars next to the safety release
clutch (3) must be parallel to one another. After the safety release clutch
has disengaged, they are no longer parallel.
To latch the safety release clutch:
1. Tilt the machine head ( p. 14).
2. Turn the left set collar (2) such that the threaded pins (1) are parallel
 The safety release clutch latches into place.
76
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before you adjust the safety
release clutch.
①
② ③
to one another.
Safety release clutch
(3) - Safety release clutch
Service Instructions 827/827-M - 01.0 - 05/2019