DURKOPP ADLER 827 Service Instructions Manual page 59

Winder
Adjusting the winder run
Fig. 40: Adjusting the winder run
(8) - Block
(10) - Winder wheel
(11) - Threaded pin
To adjust the winder run:
1. Loosen the threaded pin (12).
2. Adjust the switch cam (13) such that it is just contacting the leaf
3. Adjust the switch cam (13) such that the winder lever (3) has no axial
4. Tighten the threaded pin (12).
5. Re-assemble the winder.
Service Instructions 827/827-M - 01.0 - 05/2019
⑧
⑩
⑪ ⑫
spring (14) when the block (8) has engaged in the locking disk.
play.
⑬ ⑭
(12) - Threaded pin
(13) - Switch cam
(14) - Leaf spring
⑬
57