Adjusting The Toothed Belt Tension - DURKOPP ADLER 827 Service Instructions Manual

15.6 Adjusting the toothed belt tension

Proper setting
The toothed belt is tensioned enough to ensure an exact transmission
of the step lengths.
Fig. 53: Adjusting the toothed belt tension
(1) - Lever
(2) - Screw
(3) - Toothed belt
To adjust the upper toothed belt tension:
1. Loosen the screw (2).
2. Move the lever (1) to adjust the tension of the toothed belt (3).
3. Tighten the screw (2).
To adjust the lower toothed belt tension:
1. Loosen the screw (6).
2. Move the lever (4) to adjust the tension of the toothed belt (5).
3. Tighten the screw (6).
72
NOTICE
Property damage may occur!
Malfunctions and excessive wear.
Do not set the toothed belt tension too high.
①
②
③
④ ⑤
(4) - Lever
(5) - Toothed belt
(6) - Screw
Service Instructions 827/827-M - 01.0 - 05/2019
Puller
⑥