Integrated motor
18.3.2 Assembling the stator
Fig. 66: Assembling the stator
(1) - Stator with ring
(2) - Screws
To assemble the stator:
1. Push the stator with ring (1) onto the shaft, paying attention to the ring
2. Assemble the cover plate (3).
3. Evenly tighten the screws (2) firmly in place so that a uniform gap exists
Service Instructions 827/827-M - 01.0 - 05/2019
NOTICE
Property damage may occur!
The stator can be attracted by applying magnetic force.
Work carefully and in a controlled manner.
①
②
③
gap for the cable.
between the cover plate (3) and shaft.
(3) - Cover plate
83