DURKOPP ADLER 827 Service Instructions Manual page 90

OP1000 buttons and functions
Thread button group
Programming button group
88
Button
Start bartack
Multiple start bartack
End bartack
Multiple end bartack
Thread trimmer
Thread clamp
Needle position after sewing stop • Sets the needle position after sewing
Sewing foot lift after thread
trimmer
Sewing foot lift after sewing stop
Soft start
Speed
Function button
ESC
Programming
Function
• Sets the start bartack
• Sets the multiple start bartack
• Sets the end bartack
• Sets the multiple end bartack
• Activates or deactivates the thread
trimmer
• Activates or deactivates the thread
clamp
stop
• Activates or deactivates the sewing
foot lift after the thread trimmer
• Activates or deactivates the sewing
foot lift after sewing stops
• Activates or deactivates the soft start
• Reduces the motor speed
• Activates or deactivates any stored
function
• Ends parameter mode
Service Instructions 827/827-M - 01.0 - 05/2019