Memory Menu - Fluke Expert Series User Manual

To discover a Fluke Connect-supported tool:
1. Turn on each wireless tool and make sure the wireless feature is enabled. See the
documentation of each tool for more information about how to use the tool.
2. Turn on the Imager.
3. Select Menu > Fluke Connect > Pair to Fluke Connect Tools.
4. Push  to set selection.
The Fluke Connect button on the wireless tool starts to flash. The Imager starts to scan and
presents a list with the ID and name of available tools found within 20 m without
obstructions (open air) or within 6.5 m with obstructions (sheetrock wall). You can expect a
short delay before the scan is complete.
5. Select the tool name.
6. Push  or touch Select to select the tool.
7. Repeat to select each tool.
8. Select Done.
The labels change to include an Edit function. By default, the Imager shows and saves the
data for the selected tools.
To edit the selection:
1. On the Imager, select the tool name.
2. Push  or touch the Edit target. The Edit menu shows the option to show the
measurement data and save it with the image to the memory location selected in the
Settings menu.
The display on the Imager updates to show the wireless icon and the live measurement for
each selected wireless tool.

Memory Menu

Use the Memory menu to review or delete captured images and videos. When additional
information has been saved with the file, an icon shows with the preview file. The icons are:
IR-PhotoNotes photos

Audio

Video
k
Text

Shop for Fluke products online at:
MyFlukeStore
www.
Expert Series Thermal Imagers
1.888.610.7664
.com
Menus
33