Optional 12 V Vehicle Charger; Radio Frequency Data; General Specifications - Fluke Expert Series User Manual

Optional 12 V Vehicle Charger

1. Connect the 12 V adapter into the 12 V accessory socket of the vehicle.
2. Connect the output to the ac power socket of the Imager.
3. Charge until the indicator shows full on the screen.
4. Disconnect the 12 V adapter and Imager when battery is fully charged.
To prevent damage to the Imager, remove it from the DC car
charger before you start or jump start the vehicle.
• Always operate in the specified temperature range.
• Do not store the batteries in extreme cold environments.
• Do not attempt to charge the batteries in extreme cold environments.
Do not incinerate the Product and/or battery. Go to Fluke's
website for recycling information.

Radio Frequency Data

See Table 14 for instructions on how to access digital copies of the Certificate IDs on the
Imager.

General Specifications

Temperature
Operating
Storage
Relative Humidity
Altitude
Operating
Storage
Display
Shop for Fluke products online at:
 Caution
  Caution
TiX500
-10 °C to 50 °C (14 °F to 122 °F)
-20 °C to 50 °C (-4 °F to 122 °F) without batteries
10 % to 95 % non-condensing
2000 m
12 000 m
14.5 cm (5.7 in) touchscreen diagonal landscape color VGA LCD with backlight
MyFlukeStore
www.
Expert Series Thermal Imagers
TiX520 TiX560
.com
Radio Frequency Data
TiX580
49
1.888.610.7664