Control Panel; Basic Operation; Turn On And Off The Imager - Fluke Expert Series User Manual

Control Panel

The control panel is used to change parameters or select functions and options. Table 7 lists
the functions of the buttons on the Control Panel.
Button
 Push to turn On/Off.
Within a submenu, push to save the change and go back to the live view.

Push to open the primary menu.

Within a submenu, push to save the change and go back to the previous menu.
Within a submenu, push to cancel the change and go back to the live view

Push to move the cursor and select an option.


In live Manual Mode, push to adjust Level and Span.
Push to open the IR-Fusion Menu

Push to toggle between Manual/Auto Level and Span.

Push to open the Internal Image Memory

 Push to turn on the LED Torch/Flashlight
 Push to Zoom In/Zoom Out
 Push to open the Fluke Connect Menu
Push to automatically rescale the level and span for objects in the thermal field of
view. Use to operate the Imager in a semi-automatic mode if manual fine adjustment

of level and span is not necessary.

Basic Operation

Turn On and Off the Imager

Before you use the Imager for the first time, charge the battery for a minimum of two and one-
half hours. See Charge Batteries.
To turn on or turn off the Imager, push and hold  for 2 seconds.
To maximize the life of the battery, use the Power Save and Auto Off features. See Table 14
for more information about how to set these features.
Shop for Fluke products online at:
Table 7. Control Panel
Description
MyFlukeStore
www.
Expert Series Thermal Imagers
Basic Operation
1.888.610.7664
.com
11