Ducati Multistrada 950S 2019 Owner's Manual page 87

Changing motorcycle Load Mode setting
This function allows changing the motorcycle load
setup under static and dynamic conditions, thereby
modifying the suspension setup within the current
Riding Mode.
Available settings are as follows:
- Rider only (Rider)
- Rider with luggage (Rider / Baggage)
- Rider and passenger (Rider / Passenger)
;
- Rider with passenger and luggage (Rider /
Passenger / Baggage)
Attention
Ducati recommends changing the load mode
when the motorcycle is stopped. If the load mode is
changed while riding, be very careful (it is
recommended to change the Riding mode at a low
speed).
Every load setup is associated with a specific front
fork rebound and compression damping, a specific
rear shock absorber rebound and compression
damping as well as a specific rear shock absorber
86
;
.
Rider / Passenger
Rider / Baggage
Rider / Passenger/Baggage
Exit
;
Driver
spring preload that changes according to the Riding
Mode.
Press button (2) for one second to activate the load
mode function menu.
Now you can use buttons (1) and (2) to scroll down the
suspension settings and select "
Press button (4) to confirm the desired setting; then,
the instrument panel quits the display mode and
saves the new setting.
If you press button (4) just once with the indication
" EXIT" selected, the instrument panel quits
without applying any change.
Sport
299
km/h
Fig 30
EXIT".