Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped - Jeep Compass 2018 Owner's Manual

• Buzzer Volume: There are four options: Off,
Low, Medium, Loud
• Brake Service (If Equipped): activation of the
procedure to carry out braking system
maintenance
• Auto Park Brake (If Equipped): enable/
disable auto insertion of the Electric Parking
Brake
• Speed Warning: Set the vehicle speed limit
(km/h or MPH), which the driver is notified
through a visual and acoustic signaling (dis-
play of a message and a symbol on the
display)
• Hill Start Assist: Activation/Deactivation of the
Hill Start Assist system
Lights
By selecting Lights, the following adjustments
can be made:
• Ambient Lights (If Equipped): adjust the sen-
sitivity of lighting in the doors and overhead
console
• Lights Off Delay: set the delay for headlight
shutoff after engine shutoff
• Headlight Sensitivity: adjust the sensitivity of
headlight brightness
• Greeting Lights: activate the direction indica-
tors when unlocking the doors
• Daytime Lights (If Equipped): activate/
deactivate the daytime running lights
• Cornering Lights (If Equipped): activate/
deactivate the cornering lights
• Auto High Beam (If Equipped): activate/
deactivate the automatic high beam head-
lights
Doors And Locks
By selecting Doors and Locks, the following
adjustments can be made:
• Auto Unlock Doors: automatic unlocking of
the doors when exiting the vehicle
• Lights with Lock: activate the direction indica-
tors when locking the doors
• Horn With Remote Lock: activate/deactivate
the horn when pressing the lock button on the
key. The options are "Off", "First Press", and
"Second Press"
• Horn With Remote Start (If Equipped):
activate/deactivate the horn at the Remote
Starting of the engine with the key
• Door Unlock: allow you to choose whether to
unlock all the doors or only the driver's side
door on the first push of the unlock button on
the key
• Auto Driver Comfort (If Equipped): activate/
deactivate automatic climate control during
vehicle starts
• Key in Memory (If Equipped): activate/
deactivate memory linked to a key
Compass
By selecting Compass, the following settings
can be changed:
Calibration (If Equipped)
This compass is self-calibrating, which elimi-
nates the need to set the compass manually.
When the vehicle is new, the compass may
appear erratic, and the cluster will display
dashes (- -) until the compass is calibrated. You
may also calibrate the compass by completing
one or more 360 degree turns (in an area free
from large metal or metallic objects) until the
dashes (- -) displayed in the instrument cluster
display turns off. The compass will now function
normally.
Variance (If Equipped)
Compass Variance is the difference between
Magnetic North and Geographic North. To com-
pensate for the differences, the variance should
be set for the zone where the vehicle is driven,
per the zone map. Once properly set, the com-
pass will automatically compensate for the dif-
ferences and provide the most accurate com-
pass heading.
Battery Saver On/Battery Saver
Mode Message — Electrical Load
Reduction Actions — If Equipped
This vehicle is equipped with an Intelligent Bat-
tery Sensor (IBS) to perform additional monitor-
ing of the electrical system and status of the
vehicle battery.
77