Jeep Compass 2018 Owner's Manual page 211

The Trailer Tow Package may include a wiring
harness. Use a factory approved trailer harness
and connector.
NOTE:
Do not cut or splice wiring into the vehicle's
wiring harness.
The electrical connections are all complete to
the vehicle but you must mate the harness to a
trailer connector. Refer to the following illustra-
tions.
NOTE:
• Disconnect trailer wiring connector from the
vehicle before launching a boat (or any other
device plugged into vehicle's electrical con-
nect) into water.
Pin Number
1
2
a
3
4
5 Right Rear Position, Side Marker Lights, and Rear Registration Plate Illumination Device.
6
7 Left Rear Position, Side Marker Lights, and Rear Registration Plate Illumination Device.
8
208
• Be sure to reconnect after clear from water
area.
Seven-Pin Connector
1 — Battery
2 — Backup Lamps
3 — Right Stop/Turn
4 — Electric Brakes
Function
Left Turn Signal
Rear Fog Light
Ground/Common Return for Contacts (Pins) 1 and 2 and 4 to 8
Right Turn Signal
Stop Lights
Reverse lights
5 — Ground
6 — Left Stop/Turn
7 — Running Lamps
13–Pin Connector — If Equipped
Wire Color
Black/White
White
Brown
Black/Green
b
Green/Red
Black/Red
b
Green/Black
Blue/Red