Jeep Compass 2018 Owner's Manual page 46

Climate Controls Description
Icon
MAX A/C Setting
Press and release the MAX A/C Button in the touchscreen, or set the Temperature Control Knob to the MAX A/C Setting,
to change the current setting to the coldest output of air. Pressing the button again, or moving the Temperature Control
Knob away from the MAX A/C setting will cause the MAX A/C operation to exit.
A/C Button
Press and release to change the current setting, the indicator illuminates when A/C is ON.
Recirculation Button
Press and release this button to change the system between recirculation mode and outside air mode. Recirculation can
be used when outside conditions such as smoke, odors, dust, or high humidity are present.
NOTE:
• Continuous use of the Recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of
• The use of the Recirculation mode in cold or damp weather could cause windows to fog on the inside, because of moisture
• Recirculation can be used in all modes except for Defrost.
• The A/C can be deselected manually without disturbing the mode control selection.
Front Defrost Setting
Set the Mode Control Knob to the Front Defroster Setting, to change the current airflow setting to Defrost mode. Air
comes from the windshield and side window demist outlets when this feature is on. When the defrost button is selected,
the blower level may increase. Use Defrost mode with maximum temperature settings for best windshield and side win-
dow defrosting and defogging.
this mode is not recommended.
buildup inside the vehicle. Select the outside air position for maximum defogging.
Description
43