Jeep Compass 2018 Owner's Manual page 78

Fuel Economy
Push and release the up or down arrow button
until the Fuel Economy menu title is displayed in
the instrument cluster display. Push and hold the
OK button to reset average fuel economy fea-
ture.
• Range – The display shows the estimated
distance (mi or km) that can be traveled with
the fuel remaining in the tank. When the
Range value is less than 30 miles (48 km)
estimated driving distance, the Range display
will change to a "LOW FUEL" message. Add-
ing a significant amount of fuel to the vehicle
will turn off the "LOW FUEL" message and a
new Range value will display. Range cannot
be reset through the OK button.
NOTE:
Significant changes in driving style or vehicle
loading will greatly affect the actual drivable
distance of the vehicle, regardless of the Range
displayed value.
• Average – The display shows the average
fuel economy (MPG, or L/100 km, or km/L)
since the last reset.
• Current – This display shows the current fuel
economy (MPG, or L/100 km, or km/L) while
driving.
Trip Info
Push and release the up or down arrow button
until the Trip menu title is displayed in the
instrument cluster display. Toggle the left or
right arrow button to select Trip A or Trip B. The
Trip information will display the following:
• Distance – Shows the total distance (mi
or km) traveled for Trip A or Trip B since the
last reset.
• Average Fuel Economy – Shows the average
fuel economy (MPG or L/100 km or km/L) of
Trip A or Trip B since the last reset.
• Elapsed Time – Shows the total elapsed time
of travel since Trip A or Trip B has been reset.
Hold the OK button to reset feature information.
Stop/Start – If Equipped
Push and release the up or down arrow button
until the Stop/Start menu title is displayed in the
instrument cluster display.
Audio
Push and release the up or down arrow button
until the Audio menu title is displayed in the
instrument cluster display.
Stored Messages
Push and release the up or down arrow button
until the Messages Menu Icon is highlighted in
the instrument cluster display. This feature
shows the number of stored warning messages.
Pushing the left or right arrow button will allow
you to scroll through the stored messages.
Screen Setup
Push and release the up or down arrow button
until the Screen Setup Menu Icon/Title is high-
lighted in the instrument cluster display. Push
and release the OK button to enter the sub-
menus and follow the prompts on the screen as
needed. The Screen Setup feature allows you to
change what information is displayed in the
instrument cluster as well as the location that
information is displayed.
Screen Setup Driver Selectable Items
Upper Left
• None
• Compass (default setting)
• Outside Temp
• Date
• Time
• Ignition State
Upper Right
• None
• Compass
• Outside Temp (default setting)
• Date
• Time
• Ignition State
Restore Defaults (Restores All Settings To
Default Settings)
• Yes
• No
75