Front Head Restraint Adjustment; Rear Head Restraints - Jeep Compass 2018 Owner's Manual

WARNING!
• All occupants, including the driver, should
not operate a vehicle or sit in a vehicle's
seat until the head restraints are placed in
their proper positions in order to minimize
the risk of neck injury in the event of a
crash.
• Head restraints should never be adjusted
while the vehicle is in motion. Driving a
vehicle with the head restraints improperly
adjusted or removed could cause serious
injury or death in the event of a collision.
NOTE:
Do not reverse the head restraints (making the
rear of the head restraint face forward) in an
attempt to gain additional clearance to the back
of your head.

Front Head Restraint Adjustment

Your vehicle is equipped with front four way
driver and passenger head restraints.
To raise the head restraint, pull upward on the
head restraint. To lower the head restraint, push
the adjustment button, located at the base of the
head restraint, and push downward on the head
restraint.
To adjust the head restraint forward, pull the top
of the head restraint toward the front of the
vehicle as desired and release. To adjust the
head restraint rearward, pull the top of the head
restraint to the forward most position and re-
lease. The head restraint will return to the rear
most position.
Head Restraint Adjustment Button
NOTE:
The head restraints should only be removed by
qualified technicians, for service purposes only.
If either of the head restraints require removal,
see your authorized dealer.
WARNING!
• All occupants, including the driver, should
not operate a vehicle or sit in a vehicle's
seat until the head restraints are placed in
their proper positions in order to minimize
the risk of neck injury in the event of a
crash.
WARNING! (Continued)
• Head restraints should never be adjusted
while the vehicle is in motion. Driving a
vehicle with the head restraints improperly
adjusted or removed could cause serious
injury or death in the event of a collision.

Rear Head Restraints

The rear head restraints have two positions: up
or down. When the center seat is being occu-
pied, the head restraint should be in the raised
position. When there is no occupant in the
center seat, the head restraint can be lowered
for maximum visibility for the driver.
To raise the head restraint, pull upward on the
head restraint. To lower the head restraint, push
the adjustment button, located at the base of the
head restraint, and push downward on the head
restraint.
(Continued)
Outboard Head Restraint Adjustment Button
33