Other Items (Nos. T01 To; Other Items (Nos. T01 To - Sony SRW-5000 Operation Manual

Item number Item
A10 TC sense data
select

Other Items (Nos. T01 to ...)

Item number Item
T01 AUTO REPEAT
MODE
T02 INTERNAL VIDEO
SIGNAL
GENERATOR (HD)
T04 INTERNAL AUDIO
SIGNAL
GENERATOR
Note
Items T01, T02, and T04 are reset to their factory default
settings whenever the power is turned off.
178
Menu List
Setting Function
[LINE/24F] Specifies whether or not the time code information of FC
FC/30F output signal is returned when time code sense command
is input through the 9-pin connector.
LINE/24F: Time code information of main output signal is
FC/30F: Time code information of FC output signal is
Notes
• Pulldown output signal and 30-frame/sec time code are
• When editing pulldown output signals with a VTR
Setting Function
[off] Selects the repeating operation of PREVIEW in automatic
on editing.
off: PREVIEW in automatic editing is not repeated.
on: PREVIEW in automatic editing is repeated. To stop,
[off]
Selects the test signal output by the signal generator built
COLOR BARS into the VTR.
MULTI BURST 1 off: The test signal is not generated, and the VTR operates
MULTI BURST 2
10 STEPS all other settings: The test signal is output from the VTR. At
PULSE & BAR
RAMP
BLACK
[off]
Selects the operation of audio test signal output.
silence off: The audio test signal is not output.
1 kHz sine silence: Mute signal.
1 kHz sine: 1 kHz (In this case, a 1 kHz -20 dB FS sine
Notes
• When "silence" or "1 kHz sine" is selected, the AUDIO IN
• When the unit is operated in the 23.98 PsF or 24 PsF
returned. In pulldown conversion mode, 24-frame/sec
time code information is returned.
returned. In pulldown conversion mode, 30-frame/sec
time code is returned.
synchronized only when this unit is set to PLAY LOCK
mode. To synchronize the signals, set item A05 "PD EXT
SD REF LOCK MODE" to "lock2".
operating in 30F mode, it may not be possible to achieve
sync within 5 seconds. If this occurs, set the preroll time
to 7 seconds.
Also, normal operation is not possible with devices
engaged in player sync.
press the STOP button.
normally.
this time it is also possible to record the signal.
wave is supplied to all audio inputs.)
and AUDIO MONITOR L/R buttons light up.
mode with "1 kHz sine" selected, the output signal is
960 Hz.