Items Relating To The Time Code (Nos. 601 To; Items Relating To The Time Code (Nos. 601 To - Sony SRW-5000 Operation Manual

Items Relating to the Time Code (Nos. 601 to ...)

Item number Item
601 DF/NDF MODE
select
602 TIMER MODE
select
603 TCR MODE select
604 TC2 MODE SEL
154
Menu List
Setting Function
[drop frame] Selects the timing mode for the time code generator and
non-drop frame the CTL counter.
auto drop frame: drop frame mode ("DF" indication)
non-drop frame: non-drop frame mode ("NDF" indication)
auto: Drop frame / non-drop frame mode is selected
Notes
• This setting is only active when the frame frequency of
• When the [F7](TCG MODE) key is set to "regene" in TC
CTL Selects the mode for displaying time data.
[TC]
CTL: During playback the CTL signal recorded on the tape,
UBIT
TC: The time code value read by the time code reader, or
UBIT: The user bits inserted in the playback time code, or
[LTC]
Selects the time code read by the time code reader during
auto playback.
VITC LTC: LTC is read.
auto: If the playback speed is in the range ±1/2 normal
VITC: VITC is read.
UBG Selects the time data appearing in the second line.
TCG UBG: Displays UBG.
UBV TCG: Displays TCG.
UBR UBV: Displays UBV.
CTL UBR: Displays UBR.
VITC CTL: Displays CTL.
auto VITC: Displays VITC.
LTC auto: Displays VITC when the playback speed is in the
[off]
LTC: Displays LTC.
off: Does not display time data in the second line.
automatically on the basis of the frame frequency of
the unit. For 29.97 Hz drop frame mode is selected,
and for 30 Hz non-drop frame mode is selected. The
setting of the frame frequency mode is carried out with
the [F9](OTHERS CHECK)/ [F9] (SYSTEM) button in
MAINTENANCE menu.
the unit is 29.97 Hz or 30 Hz.
menu, the time code generator is synchronized to the
playback time code, and therefore this setting is disabled.
or during recording the CTL signal being recorded on
the tape, is counted, and the tape running time is
displayed in hours, minutes, seconds, and frames.
the time code value generated by the time code
generator is displayed. Use item 603 to toggle between
VITC and LTC.
the user bits inserted in the time code being recorded
are displayed. Use item 603 to toggle between VITC
and LTC.
speed, VITC is read, and if outside this range LTC is
read.
range ±1/2 normal speed, and LTC if outside this
range.