Adjusting The Clock; Clearing Warning Messages - Sony SRW-5000 Operation Manual

Button
[F1]
[F2]
[F3]
[F4]
[F5]
[F6]
[F7]
[F9]
[F10]
ALT/[F8]
ALT/[F9]
For more information about error log menu settings, refer
to the Maintenance Manual.

Clearing warning messages

1
Press the ALT/[F8] (CANCEL EDIT) buttons.
2
Select the message to be cleared using the R and r
buttons.
3
Press the [F2] (MARK) button.
An asterisk "*" will appear in front of the message.
The message will not be displayed or saved.
To cancel clearing
Select the warning message you want to cancel clearing,
and press the [F2] (MARK) button.

Adjusting the clock

Press the ALT/[F9] (REAL TIME) buttons in the error log
menu and use the setting below.
To get current time codes
Hold down the SFT button and press the [F5] (GET TC)
button.
To set the data and time
Hold down the SFT button and press the [F6] (SET) button.
Use the T and t buttons to move the bar to the location
to be adjusted.
Use the numeric buttons to change the value.
To adjust minutes and second to zero
Hold down the SFT button and press [F8] (ZERO) button.
To select daylight saving time and normal time
Hold down the SFT button and press [F9] (SEASON)
button.
STANDARD: normal time
138
Error Messages and Warning Messages
Display Function
PAGE TOP Move to the top page
PAGE END Move to the page containing the last message
FULL MSG Display in full the message selected with the cursor
ALL CLEAR Clear messages (LOG DATA)
WARNING Display warning messages
ERROR Display error messages
CONDITION Display condition messages
TIME Toggle between time code and real time display
EXIT Return to display of maintenance information
CANCEL EDIT Display the CANCEL EDIT screen
REAL TIME Display the REAL TIME screen
SUMMER: daylight saving time (one hour ahead of
normal time)
Note
Changing between normal and daylight saving times
changes the current time by one hour.
Even if the change crosses midnight, the current date is not
changed.
Setting
on, off
on, off
on, off
TC, REAL