Items Relating To Editing (Nos. 301 To; Items Relating To Editing (Nos. 301 To - Sony SRW-5000 Operation Manual

Item number Item
203 PARALLEL
RUNNING
204 VIDEO REMOTE
CONTROL SELECT
Sub item
1 IMAGE
ENHANCER
2 D2 SETUP
205 REMOTE
NETWORK

Items Relating to Editing (Nos. 301 to ...)

Item number Item
301 EDIT OPERATION
MODE
302 PREROLL TIME
303 POSTROLL TIME
Setting Function
[disable] Selects whether two or more VTRs can be operated
enable synchronized.
disable: Synchronized operation is not carried out.
enable: Synchronized operation is enabled.
Note
For synchronized operation to be possible, this item must
be set to "enable" on all of the connected VTRs.
Make settings for control from HKDV-900/503 via the
VIDEO CONTROL (15P) connector.
U&D Select whether to control the up-converter or down-
UP converter whether controlling the image enhancer.
[DOWN] U&D: Control both the up-converter and down-converter.
UP: Control the up-converter.
DOWN: Control the down-converter.
BLACK Select the menu item to be controlled by the SETUP dial on
[SETUP] the HKDV-900/503 with the D2 button pressed.
BLACK: Control menu item 743.
SETUP: Control menu item 762.
For details, see items 743 and 762.
Note
After changing the setting for this item, power off this unit or
HKDV-900/503 and power it on again.
on Specifies whether or not control from a network is possible.
[off]
on: Allows control from a network.
off: Does not allow remote control from a network.
Setting Function
CG Selects the animation edit mode. For normal editing, use
[normal] the "normal" setting.
CG: Primarily for recording computer graphics, this setting
normal: Use this setting for normal editing.
0 sec This sets the preroll time. The range is from 0 to 30
seconds, in steps of 1 second. The preroll time should
generally be set to at least 3 seconds, and for phase
[5 sec]
adjustment with an editing controller it is recommended to
set the preroll time to at least 5 seconds.
30 sec
0 sec This sets the tape running time after passing the OUT point
(postroll time) in automatic editing.
The range is from 0 to 30 seconds, in steps of 1 second.
[5 sec]
30 sec
allows editing by individual frames. When the edit is
completed, the OUT point automatically becomes the
next IN point. The next OUT point is automatically set
one frame ahead of the IN point.
149
Menu List