Sony SRW-5000 Operation Manual page 77

To delete a line
To delete a line, with the cursor buttons align the cursor
with the line to be deleted, hold down the SFT button, and
press the [F5] (DEL POINT) button. This deletes the line,
and renumbers the lines following the deleted line.
To display other information
To display other information, press the [F8] (TAPE INFO)
button. This opens a window to display the information.
To close the window
Press the [F8] (TAPE INFO) button.
To change the ID/ADMIN data
1
Press the ALT/[F3] (ATTRIB EDIT) buttons.
2
With the cursor R or r button, select "ID" or
"ADMIN", then press the ENTRY button.
3
With the cursor T or t button, select the character
to be entered.
4
Press the [F7] (SET LETTER) button or cursor center
button.
The selected character is entered.
5
Repeat steps 3 and 4, to enter the data.
To enter a space
Press the [F5] (SPACE) button.
If you make an error in entry
Press the [F6] (BACK SPACE) button, then carry out
entry.
Returning to the original settings
Press the [F9] (CANCEL) button, then carry out entry.
To change a character during the operation
Press the cursor R button, then move the cursor to the
ID or ADMIN frame. With the cursor T or t button,
change the character insertion position.
When not all characters can be shown within the ID
or ADMIN frame
On the left or right of the comment frame, t or T
appears.
6
Press the [F10] (SAVE/EXIT) button.
This returns to the original screen.
HDCAM format TELE FILE menu
Accessing the TELE FILE menu screen
There are two methods of accessing the TELE FILE menu
screen, as follows.
• In the CUE menu screen, press the [F4] (TELE FILE)
button.
• Set the VTR SETUP menu item 124 "Tele-File MENU
auto popup" to "on", then in the HOME, VIDEO,
AUDIO, TC, CUE, or SETUP menu screen, insert a
cassette that has an MLB-1M-100 memory label
(option) attached.
To scroll the TELE FILE menu screen horizontally
Press the cursor T or t button.
There are two ways of displaying log (IN/OUT point) data
in the TELE FILE menu screen, as follows.
• In the TELE FILE menu screen, press the [F2] (ENTRY
POINT) button, and select "IN/OUT point".
• Set the VTR SETUP menu item 126 "Tele-File ENTRY
POINT" to "IN/OUT point".
Note
While the data is being changed, if the write-protect setting
has been made for the whole TELE FILE menu, then data
changed before the setting was made is rewritten.
To exit the TELE FILE menu without overwriting
the changed point(s)
Press the EJECT button, or press the ALT/[F2] (UNDO
ALL) buttons. After a window that confirms cancelation is
displayed, hold down the SFT button, and press the [F2]
(UNDO ALL) button. The memory label contents when
the cassette was inserted are restored.
If you inadvertently press the EJECT button
without rewriting the data
Reinsert the ejected cassette within 30 seconds, and press
the [F10] (WRITE/EXIT) button. This writes the data from
immediately before ejection.
The TELE FILE menu screen scrolls in the following four
stages. Scroll the screen with the cursor T or t button.
1
C U E
R E C D A T E [ 2 0 0 3 / 0 2 / 2 5 ]
S C A N
T I T L E [
2
N o . T i m e
E N T R Y
3
P O I N T
0 0 0 : 1 4 : 1 0 : 1 0
C U E
1 - - : - - : - - : - -
C O M M N T
E D I T
C H A N G E
D A T A
D E L M A R K P R O -
P O I N T T E C T
C U E
R E C D A T E [ 2 0 0 3 / 0 2 / 2 5 ]
S C A N
T I T L E [
N o . T i m e
E N T R Y
P O I N T
0 0 0 : 1 4 : 1 0 : 1 0
C U E
1 - - : - - : - - : - -
C O M M N T
E D I T
C H A N G E
D A T A
D E L M A R K P R O - T A P E
P O I N T T E C T I N F O
E O S [ 0 1 : 0 1 : 2 4 : 1 5 ]
] R a s t 1 0 0 %
0
M r k T k C u t S c n
9
8
4
T A P E C U E N U M W R I T E /
I N F O P O I N T E X I T
E O S [ 0 1 : 0 1 : 2 4 : 1 5 ]
] R a s t 1 0 0 %
M r k T k C u t S c n
5
C U E N U M W R I T E /
P O I N T E X I T
4-4 CUE Menu
77