Sony SRW-5000 Operation Manual page 151

Item number Item
317 AUDIO EDIT MODE cut edit
318 EDIT RETRY
320 PLAY COMMAND
DELAY START
TIME
321 VIDEO PREVIEW
MODE
322 AUDIO PREVIEW
MODE
Setting Function
Specifies the type of editing for digital audio signals.
[cross fade]
cut edit: Cut editing (discontinuity in audio signal may result
fade in/out at the join, causing noise.)
cross fade: Cross-fade (see figure below.)
fade in/out: Fade-out and fade-in (see figure below.)
CROSS FADE
FADE IN/OUT
Notes
• The "t" in the figures above is the time set by item 811.
• When editing non-audio data, be sure to select "cut edit".
• Noise may be produced during the editing of certain non-
off Set this item when the VTR is used as a recorder during
[on]
VTR-to-VTR editing. Specifies the action taken when the
recorder fails to synchronize with the player VTR.
off: Editing is not executed and the VTR enters STOP
on: The VTR automatically repeats the editing (not more
–30 frame This adjusts the time in frames required between the issue
of a playback command and this unit actually beginning the
execution of the command. This adjustment is useful for
[0 frame]
synchronization between VTRs with widely differing start-
up timing.
+30 frame
[VVV] During a preview operation, this selects the video signals
VBV that can be monitored on the monitor output and line output
connectors.
VVV(VIDEO-VIDEO-VIDEO): In the editing interval the
VBV(VIDEO-BLACK-VIDEO): In the editing interval the
[SSS]
During a preview operation, this selects the audio signals
SMS that can be monitored on the monitor output and line output
connectors.
SSS: SOUND-SOUND-SOUND: In the editing interval the
SMS: SOUND-MUTE-SOUND: In the editing interval the
IN
PB
INPUT
t
IN
PB
INPUT
t
audio data.
mode.
than twice).
monitored signal is the player video signal or video
input (EE) signal.
monitored signal is a black signal.
monitored signal is the player audio signal or audio
input (EE) signal.
audio signal is muted.
OUT
t
OUT
t
151
Menu List