Other Items (Nos. T01 To; Other Items (Nos. T01 To - Sony SRW-5100 Operation Manual

Item number Item
A10 9-Pin TC sense
select
A20 Black Clip for 444-
to-422 Conversion

Other Items (Nos. T01 to ...)

Item number Item
T01 AUTO REPEAT
MODE
T02 INTERNAL VIDEO
SIGNAL
GENERATOR (HD)
T04 INTERNAL AUDIO
SIGNAL
GENERATOR
Note
Items T01, T02, and T04 are reset to their factory default
140
Menu List
Setting Function
[LINE] Specifies whether or not the time code information of FC
FC output signal is returned when time code sense command
is input through the 9-pin connector.
LINE: Time code information of main output signal is
FC: Time code information of FC output signal is returned.
Notes
• Pulldown output signal and 30-frame/sec time code are
• When editing pulldown output signals with a VTR
[on] When a 4:4:4 signal is converted to a 4:2:2 signal, this item
off specifies whether the signal that goes below the black level
(040H) is suppressed or not.
on: Signals that drop below the black level are suppressed.
off: Signals that drop below the black level are not
Setting Function
[off]
Sets the automatic repeat operation.
on off: Automatic repeat operation cannot be carried out.
on: Automatic repeat operation can be carried out.
For details, see "5-2-6 Playing Back Specified Section
Repeatedly (Automatic Repeat Playback)" on page 99.
[off]
Selects the test signal output by the signal generator built
COLOR BARS (100%) into this unit.
COLOR BARS (75%) off: The test signal is not generated, and this unit operates
SMPTE COLOR BARS
ARIB COLOR BARS all other settings: The test signal is output from this unit.
MULTI BURST 1
MULTI BURST 2
Note
10 STEPS
The test signal is output only when no cassette is inserted.
PULSE & BAR
RAMP
BLACK
[off] Selects the operation of audio test signal output.
silence off: The audio test signal is not output.
1 kHz sine silence: The silence signal is output.
1 kHz sine: 1 kHz (In this case, a 1 kHz -20 dB sine wave is
Note
The test signal is output only when no cassette is inserted.
settings whenever the power is turned off.
returned. In pulldown conversion mode, 24-frame/sec
time code information is returned.
In pulldown conversion mode, 30-frame/sec time code
is returned.
synchronized only when this unit is set to PLAY LOCK
mode. To synchronize the signals, set item A05 "PD EXT
SD REF LOCK MODE" to "lock2".
operating in 30F mode, it may not be possible to achieve
sync within 5 seconds. If this occurs, set the preroll time
to 7 seconds.
Also, normal operation is not possible with devices
engaged in player sync.
suppressed.
normally.
supplied to all audio outputs.)