Signals Being Recorded; Audio Level Meter Display Modes - Sony SRW-5000 Operation Manual

FULL/FINE button
FULL mode: The meter range is –60 to 0 dB or –40 to
+20 dB.
FINE mode: The meter scale is enlarged, and the signal
level is indicated in 0.25 dB steps, with the reference
marker indicated in the middle of each meter.
The display range of the audio level meters in FULL mode
can be set using the VTR SETUP menu item 814 "LEVEL
METER SCALE".
5-1-4 Simultaneously Monitoring
Playback of Video and Audio Signals
Being Recorded
Monitoring signals being recorded
Using the VTR SETUP menu item 017 "PB/EE SELECT
MENU", you can make a setting so that the audio and
video signals currently being recorded are simultaneously
checked.
To check video and audio signals during
recording
Set the sub item "REC" of the VTR SETUP menu item 017
"PB/EE SELECT MENU" to "PB/PB". Both audio and
video playback signals are output.
5-1-5 Audio Level Meter Display
Modes
The audio level meter display changes for each mode
depending on the current system recording mode settings
and the type of cassette in use.
SRW-5000:
Cassette
REC EE
format used
HDCAM- HDCAM-SR 12ch
SR
HDCAM/
D-BETACAM
SRW-5500:
Cassette
REC EE
format
used
HDCAM- HDCAM-SR 12ch
SR
HDCAM/
D-BETACAM
HDCAM HDCAM-SR 4ch+CUE 12ch
HDCAM/
D-BETACAM
AUTO HDCAM-SR 12ch
HDCAM/ 4ch+CUE 4ch+CUE
D-BETACAM
PB EJECT
12ch 12ch
4ch+CUE
PB EJECT
12ch 12ch
4ch+CUE
4ch+CUE
4ch+CUE
12ch 12ch
105
5-1 Preparing for Recording