Sony SRW-5000 Operation Manual page 166

Item number Item
818 PITCH
CORRECTION
DETECT MODE
select
Sub items
PITCH
CORRECTION
DETECT MODE
select Group-A
PITCH
CORRECTION
DETECT MODE
select Group-B
PITCH
CORRECTION
DETECT MODE
select Group-C
PITCH
CORRECTION
DETECT MODE
select Group-D
PITCH
CORRECTION
DETECT MODE
select Group-E
PITCH
CORRECTION
DETECT MODE
select Group-F
830 AUDIO INPUT
SELECT
Sub items
A-IN ALL
A-IN CH1
A-IN CH2
A-IN CH3
A-IN CH4
A-IN CH5
A-IN CH6
A-IN CH7
A-IN CH8
A-IN CH9
A-IN CH10
A-IN CH11
A-IN CH12
166
Menu List
Setting Function
[Mode1] When pitch correction is performed during program play
Mode2 and play at a different frequency (23.98 frame y 24
Mode3 frame, 23.98/24 frame y 25 frame, 29.97 frame y 30
OFF frame), selects the pitch correction method for each group.
Mode1: Perform pitch correction using zero-cross jump.
Mode2: Perform pitch correction using zero-cross jump
Mode3: Perform pitch correction using cross fade.
OFF: Do not perform pitch correction.
AES/EBU Selects the input signals for audio channels 1 to 12. This is
[SDI]
only valid when item 831 is set to "off".
AES/EBU: Selects signal input to DIGITAL I/O (AES/EBU)
SDI: Selects signal input to HD SDI INPUT A connector.
A-IN ALL (sub item): Sets the items A-IN CH1 to CH12 to
after low-level detection.
INPUT connector.
the same value.