Sony SRW-5000 Operation Manual page 163

Item number Item
808 AUDIO MONITOR-R
select
Sub items
A-MON CH1
A-MON CH2
A-MON CH3
A-MON CH4
A-MON CH5
A-MON CH6
A-MON CH7
A-MON CH8
A-MON CH9
A-MON CH10
A-MON CH11
A-MON CH12
809 DIGITAL JOG
SOUND
811 DIGITAL AUDIO
FADE TIME
813 AUDIO MONITOR
OUTPUT MIXING
Setting Function
Selects the audio channel output from the MONITOR
OUTPUT R connector.
[disable]
enable
disable
[enable]
[disable]
enable
[disable]
enable
[disable]
enable
[disable]
enable
[disable]
enable
[disable]
enable
[disable]
enable
[disable]
enable
[disable]
enable
[disable]
enable
[on]
Switches digital jog sound on or off.
off off: Digital jog sound is off. In this case, the audio from the
on: Digital jog sound is on.
5 ms Specifies the fade processing time during cross-fading or
[10 ms] fading-in/out of digital audio signals.
15 ms
20 ms
Note
a)
25 ms
Processing for cross fading, fading-in, and fading-out starts
b)
50 ms
after an IN or OUT point. This item specifies rewriting
85 ms
during recording following the OUT point. Rewriting of one
c)
field occurs even when the minimum setting (5 ms) is
115 ms
selected. When "cut edit" is selected in item 317 to prevent
this from happening, a discontinuity in the audio signal
occurs. There is, however, no effect on the recording of the
video signal.
a) The cross-fade time is 24 ms.
b) The actual fade time is 49 ms.
c) The actual fade time is 114 ms.
add Specifies the type of audio mixing to be conducted on the
[rms] digital audio signal output to the MONITOR OUTPUT L/R
average connector.
add: Simple addition
rms: Multiplied average
average: Simple average
Note
When the CUE channel signal is output to the monitor,
signals are mixed by simple addition.
digital channels is output, even in STILL mode, without
speed correction processing
163
Menu List