Lower Control Panel; Phones Jack; Monitor R Buttons - Sony SRW-5000 Operation Manual

h PHONES level control
Adjusts the output level to the PHONES jack.
For details, see "5-1-2 Selecting Audio Signals" on
page 103.

2-1-2 Lower Control Panel

1 Menu control section
9 DISPLAY button
0 FULL/FINE button
qa PB LEVEL button
qs REC LEVEL button
a MONITOR R buttons
Select the audio signal output from the MONITOR
OUTPUT R connector. This assigns the desired channel to
the MONITOR OUTPUT R connector. If you assign more
than one channel to the same monitor output connector, a
mixed audio signal is output.
You can also make this setting using the VTR SETUP
menu item 808 "AUDIO MONITOR-R select".
In the audio playback level adjustment mode, this is used
to select the channel to be adjusted.
b MONITOR L buttons
Select the audio signal output from the MONITOR
OUTPUT L connector. This assigns the desired channel to
the MONITOR OUTPUT L connector. If you assign more
than one channel to the same monitor output connector, a
mixed audio signal is output.

1 MONITOR R buttons

CH1 CH2 CH3 CH4
OVER OVER OVER
dB dB dB dB
0 0 0 0
-10 -10 -10 -10
-20 -20 -20 -20
-30 -30 -30 -30
-40 -40 -40 -40
L R L R L R
CH1 CH2 CH3
EDIT PRESET
F1
F2
F3
F4
DIAG
ALT F5 F6 F7
7 ALT button
8 DIAG button
i PHONES jack
Connect stereo headphones with 8 Ω impedance for audio
monitoring during recording, playback, and editing.
Adjust the headphone output level with the PHONES level
control.
2 MONITOR L buttons
L
CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12
R
OVER OVER OVER OVER OVER OVER OVER OVER OVER
dB dB dB dB dB dB dB dB
0 0 0 0 0 0 0 0
-10 -10 -10 -10 -10 -10 -10 -10
-20 -20 -20 -20 -20 -20 -20 -20
-30 -30 -30 -30 -30 -30 -30 -30
-40 -40 -40 -40 -40 -40 -40 -40
L R L R L R L R L R L R L R L R L R
CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12
VIDEO TC
F8 F9 F10
5 Color display
6 Function buttons
You can also make this setting using the VTR SETUP
menu item 807 "AUDIO MONITOR-L select".
In the audio playback level adjustment mode, this is used
to select the channel to be adjusted.
c MULTI CONTROL knob
Used to set the audio recording/playback level and make
settings in the SET UP menu (see page 97).
d Menu selection buttons
These select the menu screen displayed on the display.
HOME button: Press this to go to the HOME menu
screen. The home menu provides settings for the basic
VTR operations and editing operations.
TC button: Press this to go to the TC (time code) menu
screen. In the time code menu, you can switch LTC/
3 MULTI CONTROL knob
MULTI
CONTROL
MONITOR
HOME
TC
VIDEO
AUDIO
CUE
PF1
PF2
SET UP
4 Menu selection buttons
2-1 Control Panel
17